|
|
VocoPro UHF-5800 Professional 4 Channel UHF Wireless Microphone System $357.95 Experience ultimate freedom with the UHF-5800, VocoPro’s first 4-channel UHF wireless microphone system. With 4 handheld mics, each on its own independent UHF channel, the UHF-5800 gives you maximized vocal options without the fear of frequency interference. Going wireless means you’re free from cables for more active performances that the crowd will never forget. Plus, a 12-hour mic battery life … |
|
|
Gator Speaker Cover (GPA-SCVR450-515) $49.95 It has a hideaway rain cover and can fit the speaker while on a stand. The case has zippered access to the front so the speaker can function while inside the cover. There is touch fastener access to the speaker handles and access to the rear control panel. Features: Nylon Touch fastener and zipper closures Hideaway rain cover Zippered access to speaker front Access to handles with touch fastener c… |
|
|
B-52 Matrix-1000 V2 700W Active 3-Piece Speaker System $1,599.99 The B-52 Matrix-1000 V2 Speaker System comes with 2 10″ 2-way powered satellites and a dedicated powered 15″ subwoofer. The Matrix-1000 V2 has a built-in 3-channel 700W power amplifier, 3 independent volume controls, electronic crossover with equalization, and VCA compressor. The circuitry is designed and fine-tuned to integrate all components for the best possible sound. There is no need to tweak… |
|
|
Brand New Peavey Pv 14 14 Channel Pv Series Compact Mixer w/ Built-in DSP Effects Processor $299.99 Brand New Peavey PV 14 14 Channel PV Series Compact Mixer w/ Built-in DSP Effects Processor Features: Built-in DSP effects processor |
Peavey Dj Mixer!
Part II, DJ RENEgade show, Used chauvet strobe, American DJ stand, Peavey amp, behringer mixer
Peavey Dj Mixer Questions
Does anyone know how to use and equalize a Subharmonic Synthesizer???
Because when I use it i cant get the bass to sound good, it sounds loose and not loud. This is the setup. A american dj mixer, to the DOD EQ then to a PEAVEY CROSSOVER then to the PEAVEY Subharmonic Synthesizer its a KOSMOS generation 1 and then from the out to the amps. i have 3 amps, 2 for subs and 1 for mains. can u help?
Because when I use it i cant get the bass to sound good, it sounds loose and not loud. This is the setup. A american dj mixer, to the DOD EQ then to a PEAVEY CROSSOVER then to the PEAVEY Subharmonic Synthesizer its a KOSMOS generation 1 and then from the out to the amps. i have 3 amps, 2 for subs and 1 for mains. can u help?
peavey kosmos
peavey kosmos
You may need to tame the Subharmonic Synthesizer. Putting a compressor or another EQ after the crossover can help. The subharmonic synth is usually mixed with the original bass sound (it is in addition to the original bass frequencies). Try listening to the output of the crossover direct to the amps (without the sub harmonic synth)…you will hear what I am talking about. You may want to remove it from the picture altogether. Most music (CD, LP, etc.) already has plenty of subharmonic content…the crossover will help set the point at which this content is sent to the sub.
